Note 2: If you have a corrupted partition table (Odin says:
"there is no pit partition" or "Re-Partition operation
failed"), flash pit file for your device (attached, dont forget to unzip
it) (put it in pit window) with your firmware (some users reported that it
worked without firmware), in this case "Re-Partition" must be marked.
Note 3: If you use pit file, and you had an encryption password
for your data, the password will reset! so you must hard reset your phone after
flashing with pit file with encrypted data.
Note 4: If you want, after rooting with odin, to get official
status and reset binary counter ON I9505 for warranty reason, do it before
flashing stock firmware, refer to HERE.
Note 5: To change to the new CSC, just boot into recovery, wipe
data and cache, reboot. If not use this great app to change your product code
(must be rooted).
Note 6: If you flash I9500 stock firmware for China region, it
will flash sboot.bin with it, that leads to have a Chinese bootloader (download
mode will be in Chinese language and boot splash name will change). Even if you
flash other stock firmware, it will not change the bootloader. So flash
"GT-I9500_sboot.tar" (attached) as pda in Odin and it will fix the
issue. (works on 4.2.2 firmwares!)
Note 7: Once stock 4.3/4.4.2 firmware is flashed, you can not
downgrade to a previous version due to the new bootloader.
Odin troubleshooting: If Odin accidentally gives you
"fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Bootloop troubleshooting: Bootloop occurs when a smartphone is
not able to boot properly and stuck on Bootanimation and mainly caused by
system files interfering with each others which cause instability and/or crash
at the boot sequence. How to fix:
- Boot the device either into stock or custom recovery mode,
wipe cache then reboot, if still, boot again in recovery and wipe data/factory
reset then reboot. If not:
- Restore a nandroid backup with custom recovery if present. If
not:
- Flash or reflash the official stock firmware. If not:
- Flash stock firmware with the appropriate pit file, after
"pass", unplug usb cable, pull battery out for a minute, insert it,
boot into recovery, wipe data and cache, reboot.
 | I9505_pit file.zip - [Click for QR Code] (1.2 KB, 71734 views) |
| I9500_pit file.zip - [Click for QR Code] (1.0 KB, 28809 views) |
 | GT-I9500_sboot.tar - [Click for QR Code] (1.10 MB, 19993 views) |
| AT&T SGH-I337_16GB_pit file.zip - [Click for QR Code] (1.2 KB, 3152 views) |
| Verizon SCH-I545_pit file.zip - [Click for QR Code] (1.2 KB, 2115 views) |
| Sprint SPH-L720_16GB_pit file.zip - [Click for QR Code] (1.2 KB, 2531 views) |
| Canadian SGS4-Wind (Canada)_pit file.zip - [Click for QR Code] (1.2 KB, 1156 views) |
| I9506_pit file.zip - [Click for QR Code] (1.7 KB, 1232 views) |
| I9500_pit file (Chinese firmware).zip - [Click for QR Code] (1.0 KB, 2275 views) |
0 komentar: